Home > Home-and-Garden > Home-Improvements-and-Repairs > h1 class="firstHeading">Construct a Septic System
h1 class="firstHeading">Construct a Septic System
Equipment as well as Supplies
Equipment as well as Supplies
- (9) cubic yards of 3/4 or 1 1/2 crushed rock
- (80) square feet of l as well as scape fabric
- (2) 55 gallon plastic drums
- (10) ft of 4" ABS plastic pipe
- (1) 4" ABS 90 degree bend (sometimes called a street Ell)
- (1) 4" ABS Y branch (sometimes called a Y bend)
- (3) 4" ABS 45 degree bend
- (4) 10 ft. length of 4" perforated drain pipe
- (2) 4" drain pipe couplers
- (2) 4" toilet flanges
- The horizontal side of the "Y" connects to the waste source, as well as should be fitted with a connector that fits the source supply line.
- The vertical side of the "Y" will be used to pump out the tank when it is completely fill with solids.
- The depth of the trench is relative to the depth of the waste source line. If the line is deeper than the one shown, you will have to dig the trench deeper to accommodate that depth.
- After a while, you may see settlement where the trench was. Fill with more soil as well as compact with wheel of your car. Don't drive over the area that contains the drums.
Submitted by: admin
Hits: 0
Added: Thu Feb 02 2006
